BASS GUITAR SETUP AND REPAIR

INTRODUCTION

You just bought a guitar and you’re so excited? You play every day, several times a day, and boom! It suddenly starts playing differently.It stops resonating well. The strings now need more pressure to fret. And it’s making you fret. Don’t you worry, buddy. Bass guitars are instruments too. They need setup and fixing from time to time. Guitar repair it is called. And you know what? You needn’t get frustrated because you can do it too. Read along to know how.

 

REMOVE OLD STRINGS

The strings are to the bass like the engine is to the car. The bass just ceases to be a bass without the strings. Same as when there are strings, but they are rusty old, and all worn out. Remove those strings. They won’t resonate well. They’ve got no reason to, really. They are old!

 

CLEAN THE BASS REALLY WELL

Next, set to cleaning your guitar. Those string are off the way now. Get some guitar cleaner, lemon oil, a piece of soft cloth, an old toothbrush and some cotton swabs for places you can’t have easy access to. A rusty and moldy guitar would lead to collapse of the bridge and the neck of the guitar, and with these, no amount of setup would make the guitar work well. Cleaning up is very important.

The toothbrush is used to scrub behind the frets and the cotton swabs for the bridge. Lastly, pour some lemon oil on the fret board, allow to soak for 10 minutes and clean up using the cloth. Your new strings are ready to be fixed. Yay! More details.

 

INTONATE YOUR BASS

A tuner is used to intonate the bass and the best is the chromatic. It reads the intonations more efficiently. Start with your open E and tune it perfectly. Next, fret the twelfth fret of your E. The note should be an E, and it should be perfectly in tune. This is very important. Check your string’s saddle and see if it requires a screw driver or Allen wrench. It could have come with the guitar kits too. Tighten the twelfth fret E was flat and loosen a bit if it was sharp. As every adjustment either adds or reduces the tension in the strings and consequently their tunings, for every adjustment of the twelfth fret of your E, retune your open E.Be patient. Once this is completed, repeat the same process for the other strings. It is fun, trust me!

MAKE SURE THE GUITAR NECK ISN’T BOWED

Hold your bass 45 degrees from you to do this. There is a truss rod that is found just behind the nut, behind the strings. Loosen the truss rod if you notice a dip and tighten it if you notice an arch. Determine the level of the neck. If it is not level, do that by either tightening or loosening the truss rod a quarter of a turn at a time.

CONCLUSION

Tada! This is all you need to setup your bass guitar. Gone are the days of the frustration. Follow the steps above and your guitar setup would be complete leaving your bass new once more and you will enjoy playing it for quite some time. You have gotten the best guitar under 1000 minutes! Learn more details at: https://guitarniche.com/category/guitar-setup-and-repair/